Westfield parts and upgrades

WESTFIELD PART NO: 3711052B

DESCRIPTION:

Standard track front bottom wishbone.
Fits all Westfield models 1988 - on wards, with Cortina uprights or Westfield Aluminium uprights.
These wishbones do not fit Mazda SDV or Sierra SDV vehicles.
Direct replacement for previous wishbone with Cortina ball joint (4 bolt flange).  
If you are replacing the previous Cortina style ball joint they MUST be replaced as a pair, Both sides of the vehicle must have the same arm, if you need to replace both arms please change quantity to 2 units.
Wishbones are supplied as pictured without ball joints and bushes, these must be ordered separately, please see related items.
Suitable for all types of suspension bush, metalastic, nylon and Powerflex.

WESTFIELD PART NO: 5221000

DESCRIPTION:

Lower steering column including high tensile bolts
End to end measurement is 815mm.
This steering column can be used on Black Top Zetec's that have throttle bodies fitted to replace the 3 piece column kit.

WESTFIELD PART NO: 2111250

DESCRIPTION:

1 Toyo R888R 205/50/15 GG COMPOUND

Developed for the track, Proxes R888R delivers supreme dry handling.

With enhanced steering feel and response, combined with higher stability on the throttle, Proxes R888R allows track users to carry higher speed through corners for faster laps.

Faster cornering, longer lasting and more consistent, Proxes R888R translates power into lap times.

Road legal tyre

Caution is advised in wet and extreme wet conditions due to limited anti-aquaplaning capabilities. These tyres are not intended to be used as regular road driving tyres, and should not be used in any sort of cold/winter conditions.

As this tyre is designed and produced with competition compounds, no warranty is implied or given.

E-Marked (for road use)
MSA List 1B approved

WESTFIELD PART NO: 4321013B

DESCRIPTION:

Hub rear B type c/w studs
Price is per single hub
***Please be aware, these are not suitable for vehicles with Free Lander differentials ***

WESTFIELD PART NO: 5585073B

DESCRIPTION:

RH Cycle Wing bracket
Designed for Westfield aluminium uprights
A spacer may be required to help with clearing tyres depending on setup.
Will not fit fabricated uprights
Right Hand (Offside)
Please note that the lead time if we have no stock is 4 weeks

WESTFIELD PART NO: 5585072B

DESCRIPTION:

LH Cycle Wing bracket
Designed for Westfield aluminium uprights
A spacer may be required to help with clearing tyres depending on setup.
Will not fit fabricated uprights
Left Hand (Nearside)
Please note that the lead time if we have no stock is 4 weeks

WESTFIELD PART NO: 5525012

DESCRIPTION:

ZK Body Spare Wheel Kit
Spare wheel kit includes - Spare wheel bracket and carrier to support the spare wheel. Washers and bolts are also included. 

WESTFIELD PART NO: 5224050

DESCRIPTION:

Steering Column Lock With Keys and Loom
Please note this lock only suits a 28mm diameter column shaft, please check this before ordering.

WESTFIELD PART NO: 2321003

DESCRIPTION:

KA handbrake lever
Please note that the original Ford Sierra handbrake mech is now no longer available and chassis modification may be needed to fit this handbrake. 

WESTFIELD PART NO: 5232501

DESCRIPTION:

Steering Wheel used for IVA testing.
Steering wheel only, no Pad or Boss included.
Both parts available separately. 

WESTFIELD PART NO: 5235010

DESCRIPTION:

Steering Wheel Centre Pad
Pad will fit our standard steering wheel only and not the Momo wheel
IVA Requirement

WESTFIELD PART NO: 5222022B

DESCRIPTION:

Westfield Outer Steering Column Tube
Used on 7 style cars, not suitable for the XI
End to end measurement is 59.5cm

WESTFIELD PART NO: 3724001

DESCRIPTION:

Front wheel bearing to suit aluminium front hubs.
This kit will also suit the original cortina hubs.
Kit includes bearings, seal and split pin.

WESTFIELD PART NO: 3750003

DESCRIPTION:

Bottom ball joint 3rd generation only.

Suitable for all Westfield vehicles that are fitted with 3rd generation wishbones.

Ball joint is pressed into the Wishbone, please be mindful a press is required for installation.

WESTFIELD PART NO: 3715053

DESCRIPTION:

Rear Anti Roll Bar Block
Used on both FW and ZK Rear anti roll bars.

WESTFIELD PART NO: 3752002

DESCRIPTION:

Bottom ball joint (sold as an individual unit )
Please note these have a two bolt flange fixing, if your Westfield has the four bolt flange these are not a direct replacement.
***If you have the four bolt flange ball joints on your Westfield and cannot find a suitable replacement in the aftermarket sector, you will need to upgrade to the newer version of the standard track wishbone - 2 x  3711052B. You will also require 2 x 3752002. Lastly you will require replacement 4 x suspension bush - various options, please search for 'suspension bush'.
2 bolt flange style fitment wishbones are a direct replacement for the older 4 bolt flange wishbones.
***Will NOT suit 3rd generation wishbones.

WESTFIELD PART NO: 5213002

DESCRIPTION:

Track Rod End
Track rod ends are not handed so can be used either side of rack.
Priced and sold individually
Not suitable for Mazda SDV

WESTFIELD PART NO: 4316118

DESCRIPTION:

Rose Joint 1/2"x1/2"
Listing is for a single rose joint and you will need 1 x sleeve 4319001
to make the size 7/16 for upright stud

WESTFIELD PART NO: 3739003

DESCRIPTION:

Aluminium Upright Sleeve To Suit STD/Wide Track
Please note this sleeve will not suit 3rd generation suspension.
Listing is for one sleeve and these sleeves fit both the top and bottom of upright.

WESTFIELD PART NO: 1417088

DESCRIPTION:

Westfield XI Lower Upright Bronzed Spacer