Westfield parts and upgrades

WESTFIELD PART NO: 3230195

DESCRIPTION:

Gearbox conversion for Westfield XI - 5 speed

Kit Includes:

-clutch plate
-clutch cover
-clutch release bearing
-spigot bearing for flywheel
-propshaft type 9
-gearbox type 9
-bell housing
-type 9 gearbox mounting rubber
-speedo cable

WESTFIELD PART NO: 2340076

DESCRIPTION:

Westfield Racing 4 pot caliper upgrade kit

The kit includes, Westfield Racing pot callipers, Grooved and vented 283mm front discs, Ferodo DS2500 pads (upgraded pad spec), All fittings to mount  the parts to your car. 

Will fit Westfield aluminium uprights and hubs and ford Cortina front uprights and Cortina hubs.

THIS BRAKE KIT WILL FIT INSIDE WESTFIELD STANDARD FITMENT 13" WHEELS
Flexible hoses not included in kit. If you require hoses they are available separately

WESTFIELD PART NO: 2340075

DESCRIPTION:

Westfield Racing 4 pot caliper upgrade kit

The kit includes, Westfield Racing pot callipers, Grooved and vented 283mm front discs, Ferodo DS2500 pads (upgraded pad spec), All fittings to mount  the parts to your car. 

Will fit Westfield aluminium uprights and hubs and ford Cortina front uprights and Cortina hubs.

THIS BRAKE KIT WILL FIT INSIDE WESTFIELD STANDARD FITMENT 13" WHEELS
Flexible hoses not included in kit. If you require hoses they are available separately

WESTFIELD PART NO: 3500120

All new 2025 Westfield tail light kit as used on the new Se.Na model. The kit includes:

2 x LED Rear Tail Lights with Integrated Fog Lamps
2 x LED Rear Stop/Tail Lamp with integrated Indicator Lamps
2 x LED Reverse Lamps
4 x LED Lamp Mounting Plates

This kit is IVA compliant and the inner lamps that have the side and fog lights in also have reflectors in them and the brake light is also fully compatible.

Please note these are not a direct fit to Westfield Chassis Loom (2921175) and will require modification to the loom. The reverse and fog lights will need extending and the plugs amending for the new tail lamps

WESTFIELD PART NO: 4633037

DESCRIPTION:

Half cage roll bar for widebody cars, with double central cross brace and 2 rear stays.
Suitable for classic and FW body styles.
Supplied with all nuts bolts and washers, all parts needed to fit the bar to your car.

Meeting MSA requirements. will suit LHD and RHD cars also suitable for trackdays, hillclimb, sprint and racing. please check the regulations for your individual championship.

Height, 485mm from roll bar mounting plates on your chassis.

PLEASE NOTE THAT THIS ITEM IS COLLECTION ONLY AND CANNOT BE SHIPPED.

WESTFIELD PART NO: 5552284

DESCRIPTION:

Westfield half hood to fit a wide body Westfield with a Westfield roll cage fitted and either a Westfield windscreen or aeroscreen. No fittings included.

The half hood is secured to the roll cage with velcro straps and the rear mountings can be fitted various ways so we leave this down to customer choice.

Please check the windscreen you have fitted is the correct one to the half hood you are ordering as these are made to order and non refundable.

Please note as this item is above 100cm in length we incur a surcharge from our shippers which is included in the delivery price at point of checkout.

WESTFIELD PART NO: 4611138

DESCRIPTION:

4 Point Ultralite FIA Harness

3" premium webbing for added comfort
Competition quick release turn buckle (Available in both right and left hand mounting)
Smooth running aluminium adjusters all around
Bolt in fixings all around (Bolts supplied)
Option for the shoulder straps to wrap around roll cage if required
Securing tab for intercom cables on the shoulder strap
Thumb loops on lower shoulder straps
FHR Compatible

WESTFIELD PART NO: 2940064

DESCRIPTION:

Zetec Blacktop Alternator Fitting Kit
Kit components:1 x 4942056 - Alternator plate1 x 2945156 - Alternator belt 2L Blacktop1x x 2942126B - Alternator bracket Zetec R1 x 1416143 - Spacer idler pulley Zetec R1 x 1417132 - Spacer idler pulley short1 x 1470189B - Mounting plate idler pulley1 x 2943038 - Pulley1 x 2943011 - Idler pulley1 x 6811010 - M10 Lock washer single1 x 6823UTO - M10 washer1 x 8155450 - M10x45 socket cap bolt1 x 8111800 - M10x 80 hex head bolt6 x 6802801 - M8 plain washer1 x 6811008 - M8 washer lock singe coil4 x 71230008 - M8 x 1.25 nyloc nut1 x 8111308 - M8 x 30 hex head 1 x 8111358 - M8x35 hex head bolt3 x 8111408 - M8x40 hex head bolt1 x 8165840 - M8x40 special cap head

WESTFIELD PART NO: 2314188

DESCRIPTION:

Brake Master Cylinder - 20mm Large Bore - M8 Threaded Rod

Suitable for all current Westfield vehicles, Special Edition FW or ZK, Mega S2000 and Mazda applications. Not suitable for LHD XI, Sport 250 or ST models.

If you have an early Westfield model and it has floor mounted pedal this master cylinder is suitable.

*** We DO NOT have a replacement seal kit for this master cylinder***

***Will not fit as a replacement for the Cortina master cylinder - mounting holes are in a different position. Cortina had horizontal mounting holes, our master cylinder has vertical mounting holes***

WESTFIELD PART NO: 4312205B

DESCRIPTION:

RH Rear Bottom Wishbone
Current spec wishbone with mounting brackets welded on

WESTFIELD PART NO: 4611135

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611136

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611134

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611133

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611132

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 4611131

DESCRIPTION:

FIA approved Magnum TRS premium harness, 4 point fixing with 3" straps. Fits all Westfields with lowered floors with two eye bolt mounts. *** Please be aware as harnesses do not have E mark and for this reason are non IVA compliant***

Left and right hand captive options available. Priced and sold individually.

Steel anti-creep adjusters
Snap hook fixings all around
FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.
TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.

Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.

Weight: 1201 grams

***Please note, this will suit Westfields with flat floors - only if seat is right back against the rear bulk head. If moved forward they not be applicable***

WESTFIELD PART NO: 1720094

DESCRIPTION:

Zetec Engine Mounting Set

WESTFIELD PART NO: 4043070B

DESCRIPTION:

FW Fuel Tank Mounting Frame

WESTFIELD PART NO: 3224066B

DESCRIPTION:

Mazda SDV LH Diff Mounting Bracket

Please note that this is a clearance section item and cannot be returned or refunded.

Once this item is sold out, it will not be available again from Westfield Chesil Ltd.

If the item is purchased but out of stock due to high demand, a full refund will be issued.

Price Reduced from £179.99

WESTFIELD PART NO: 3224065B

DESCRIPTION:

Mazda SDV RH Diff Mounting Bracket

Please note that this is a clearance section item and cannot be returned or refunded.

Once this item is sold out, it will not be available again from Westfield Chesil Ltd.

If the item is purchased but out of stock due to high demand, a full refund will be issued.

Price Reduced from £149.99