Westfield parts and upgrades

WESTFIELD PART NO: 3740006

DESCRIPTION:

Wide Track Protech Shock and Spring Kit
Suitable for wide track and 3rd Gen wishbones 
Will NOT suit STD track suspension Will NOT Suit Sport 250 Models

WESTFIELD PART NO: 3740011

DESCRIPTION:

Set of 4 shock absorber and springs
Suitable for Standard wishbones 
Will NOT suit wide track or 3rd gen suspension  

WESTFIELD PART NO: 3700143

DESCRIPTION:

Aluminium front uprights (pair) without calipers.

These uprights are for 3rd generation suspension setups.

Will not suit standard or early wide track suspension

Complete built up as pictured.

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3700142

DESCRIPTION:

Aluminium front uprights (pair) without calipers.

These uprights are for standard or early wide track suspension setups.

Will not suit 3rd generation.

Complete built up as pictured.

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3702093

DESCRIPTION:

Wide track front wishbone kit 3rd generation.

Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.

The full set of wishbones is 1 kg lighter than the standard Westfield widetrack

Kit Includes:

2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.

You will also require

8 suspension bushes (4313001)

2 longer brake hoses. (sei rear brake hoses required 2311007)2 Wide track front springs (3702093)

NOTES.

This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.

*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit***If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**

WESTFIELD PART NO: 3740002

DESCRIPTION:

Wide Track Shock and Spring Kit
Suitable for wide track and 3rd Gen wishbones 
Will NOT suit STD track suspension Will NOT suit Sport 250 Models  

WESTFIELD PART NO: 3740056

DESCRIPTION:

Set of 4 shock absorber and springs
Suitable for Standard wishbones 
Will NOT suit wide track or 3rd gen suspension  

WESTFIELD PART NO: 3730003

DESCRIPTION:

RH 3rd Generatio Aluminium front upright

This upright is for 3rd generation suspension setups.

Will not suit standard or early wide track suspension

Complete built up as pictured (RH upright only)

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3730002

DESCRIPTION:

LH 3rd Generatio Aluminium front upright

This upright is for 3rd generation suspension setups.

Will not suit standard or early wide track suspension

Complete built up as pictured (LH upright only)

Weight: 4.6 kg per pair.

WESTFIELD PART NO: 3730001

DESCRIPTION:

RH Standard and wide track Aluminium front upright

This upright is for standard or wide trac suspension setups.

Will not suit 3rd generation suspension

Complete built up as pictured (RH upright only)

Weight: 4.6 kg per pair.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 3730000

DESCRIPTION:

LH Standard and wide track Aluminium front upright

This upright is for standard or wide trac suspension setups.

Will not suit 3rd generation suspension

Complete built up as pictured (LH upright only)

Weight: 4.6 kg per pair.

ORDER INFORMATION:

Where held in stock your order will be delivered in a maximum of 2-3 days. Delivery on special orders products is shown at the bottom of this page.

HELP:

If you are unsure whether this part will fit your Westfield, Please contact us on parts@westfield-sportscars.co.uk

WESTFIELD PART NO: 4310002

DESCRIPTION:

Powerflex Suspension bush kit, includes 16 powerflex bushes and 2 metalastic for outer bottom wishbone bushes.
Ultimate performance polyurethane bushes
Designed to give Sport Handling on road or track

WESTFIELD PART NO: 3742078

DESCRIPTION:

Nitron competition front shock absorber. - Priced and sold individually.
Please note that these shocks will only suit standard track suspension
When ordering, please advise what model you have in the notes section.
Below are a list of some model examples. Westfield Megabusa, Westfield Sport 250, Westfield S2000, Westfield Special Edition, Westfield Mazda, Westfield ST2 or Westfield ST3

WESTFIELD PART NO: 5211027

DESCRIPTION:

LHD High Ratio Quick Rack Steering Rack 2.4

2.4 turn as apposed to the 2.7 on the standard racks

Suitable for vehicles with wide track or third generation wishbones.
Will not suit standard track suspension setups 

Shipping of over sized items may attract a higher charge depending on a range of factors that cannot presently be calculated at the point of sale. We may need to apply a delivery surcharge to your order. If that situation arises, we will contact you.

WESTFIELD PART NO: 5211015

DESCRIPTION:

RHD High Ratio Quick Rack Steering Rack 2.4

2.4 turn as apposed to the 2.7 on the standard racks.

Suitable for vehicles with wide track or third generation wishbones.
Will not suit standard track suspension setups 

Shipping of over sized items may attract a higher charge depending on a range of factors that cannot presently be calculated at the point of sale. We may need to apply a delivery surcharge to your order. If that situation arises, we will contact you.

WESTFIELD PART NO: 3742001

DESCRIPTION:

1 front standard track shock absorber to suit Westfield standard wishbones.
Suitable for some narrow bodied vehicles and early wide body vehicles.
With the exception of early midget based donor vehicles.
Will not suit any wide track suspension
Weight: 1.45 kg per shock, 2.90 kg per pair.
Fitted to Westfield XI as rear shocks
Shock absorbers are sold in pairs.

WESTFIELD PART NO: 3711252B

DESCRIPTION:

Wide Track Front Bottom Wishbone
Will not suit standard or 3rd gen suspension setups

WESTFIELD PART NO: 4342005

DESCRIPTION:

Dampers rear and wide track front - price per shock

If you have wide track suspension you will need 4 of these shocks 
Brand new for the Westfield, made from 45 M/M diameter 6262 specification aluminium with adjustable spring seat platform for 1.9" I.D. springs
A great high quality mid range damper, single adjustable for bump and rebound.
Weight: 1.05 per shock. 2.10 kg per pair.
Listing is for one shock absorber.

WESTFIELD PART NO: 3712212B

DESCRIPTION:

Wide Track Front Top Wishbone
Will not suit 3rd gen suspension setups

WESTFIELD PART NO: 3711052B

DESCRIPTION:

Standard track front bottom wishbone.
Fits all Westfield models 1988 - on wards, with Cortina uprights or Westfield Aluminium uprights.
These wishbones do not fit Mazda SDV or Sierra SDV vehicles.
Direct replacement for previous wishbone with Cortina ball joint (4 bolt flange).  
If you are replacing the previous Cortina style ball joint they MUST be replaced as a pair, Both sides of the vehicle must have the same arm, if you need to replace both arms please change quantity to 2 units.
Wishbones are supplied as pictured without ball joints and bushes, these must be ordered separately, please see related items.
Suitable for all types of suspension bush, metalastic, nylon and Powerflex.